Street and Race Performance In One Package!
This is the engine of choice for many street rods, drag racers, and
show cars. With 355 HP and 405 ft.lbs. of torque, this small block
aluminum head engine gives you alot of bang for your buck. Starting with
a 4-bolt main block, undercut rolled /forged steel crankshaft, PM Steel
connecting rods and high silicon aluminum pistons w/ offset pins, you
start to understand how over 400 ft.lbs. of torque is generated. Add to
the mix angle plug aluminum cylinder heads with 58cc combustion chambers
and 1.94'' int./ 1.50'' exh. valves and you get a responsive 10 to 1
compression ratio. And helping this combination breathe is a steel
hydraulic roller tappet camshaft with .474'' int./.510'' exh. lift that
has just enough lope for that muscle car sound.
355 HP @5250 RPM, 405 FT.LBS of Torque @ 3500 RPM (Max. Recommended
10.1:1 Compression Ratio
Cast Iron 4-Bolt Block with One-Piece Rear Main Seal
Forged Steel Crankshaft
High Silicon Aluminum Pistons w/Offset Pins
PM Steel Connecting Rods
Aluminum Angle Plug 58cc Chamber Cylinder Heads w/ 1.94'' Int./
1.50'' Exh. Valves
Steel Hydraulic Roller Cam, Lift: .474'' Int./ .510'' Exh., Duration
@ .050: 208° Int./ 221° Exh.
1.5 Ratio Rocker Arms
Aluminum Dual Plane Intake Manifold
8'' High-RPM Torsional Damper
Cast Iron Water Pump
Note: Carburetor, spark plug wires, starter, oil filter and
oil filter adapter, and exhaust manifolds are not included.