Great Racing Power At A Reasonable Cost!
Complete, race ready crate engines for circle track racing series/classes
that use a ''spec'' engine package to keep cost down and the fun level
up in this ''dollars equals wins'' modern day racing world. Engines are
sealed at the instake manifold, cylinder heads, front cover and oil pan
with special twist off bolt heads. Feature stamped steel valve covers
with racing style breathers installed and 8-quart kick-out circle track
''Factory Stock - 350 H.O.''
350HP @ 5000 RPM, 390 ft./lbs. @ 3800 RPM
9.1:1 Compression Ratio
Cast-Iron Four Bolt Main Block w/One Piece Rear Main Seal
Nodular Cast Iron Crankshaft
5.70'' PM steel Connecting Rods
Cast Aluminum Pistons
Hydraulic Flat Tappet Camshaft, Lift: .435'' Int/.460'' Exh.,
Duration @ .050'': 212° Int./222° Exh.
Cast Iron Vortec Cylinder Heads w/64cc Combustion Chambers, 1.94''
Int./1.50'' Exh. Valves
1.5:1 Rocker Arms w/''Kool Nut Design'' Rocker Arm Nuts
High Rise Dual Plane Intake MAnifold
8-Quart Single Kick-Out Oil Pan (w/Oil Filter), 8'' Deep
Does Not Include Water Pump